News Ticker

Menu

UpWork (oDesk) & Elance AutoCad 2007 Test Question & Answers

UpWork (oDesk) & Elance AutoCad 2007 Test Question & Answers are really very important to pass UpWork & Elance test. You will get top score at this skill test exam. If you found any problem or wrong answer please inform me via contact or comments. We will try to solve it in short. This test is extremely valuable to acquire knowledge of AutoCad 2007. Lets Start test.


Ques : Which of the following is not part of the Information title block?
Ans  : Size of the drawing

Ques : Which of the following tool palettes settings is not saved with your profile?
Ans  : Both a and b

Ques : Which of the following objects cannot be extruded?
Ans  : Planar faces on solids

Ques : Which option you will select to set the relative path for all hyperlinks in a drawing?
Ans  : Click File menu > Drawing Properties. On the Statistics tab, enter a relative path in Hyperlink Base

Ques : State whether True or False.

Tool palette files have an.xtp file extension.
Ans  : True

Ques : What does b stand for in the given example when you turn the automatic save option on as shown in the given picture?
Ans  : b is the number of open instances of the same drawing in different work sessions

Ques : What will occur when you close the balloon message without reloading as shown in the picture?
Ans  : It reloads all changed Xrefs

Ques : Which type of grip tool is shown in the given picture?
Ans  : None of the above

Ques : which of the following is not a type of action override?
Ans  :  All of the above

Ques :  Which of the following windows cannot be docked, anchored, or floated?
Ans  : None of the above

Ques :  Which option in the given picture displays parallel projection?
Ans  :   A

Ques :  Which of the following options can not be offset?
Ans  : None of the above

Ques :  What is not true about ray traced shadows?
Ans  :  Ray traced shadows are calculated with a map

Ques : Which of the following type of objects, is not supported by Associative Dimensions?
Ans  : All of the above

Ques :When is the lock icon displayed in the lower corner of the tool palette?
Ans  :  When a tool palette file is set with a read-only attribute

Ques : State whether True or False.

The default value for Maxhatch is 10000.
Ans  : True

Ques :  State True or False.

Double click actions cannot be created for OLE and Viewport objects.
Ans  : False

Ques : State whether True or False.

When geometry acceleration is off, full shadows cannot be displayed.
Ans  : True

Ques : Which of the following wild card characters you will use to match any single character?
Ans  : ?

Ques : Which of the following settings are saved when you name and save a view?
Ans  : All of the above

Ques : Which command is used on picture A to create a mesh or to acheive the result of picture B?
Ans  : REVSURF

Ques : You can change a markup's status to which of the given options?
Ans  : For Review

Ques : Which of the following is the default mode state for shadows?
Ans  : Simple

Ques : When can an Xref icon displayed in the lower right corner of the application window as shown in the picture?
Ans  : When Xrefs are attached to the drawing

Ques : Which of the following tab you will choose to prevent signature status from being displayed for valid signatures, as shown in the picture?
Ans  : C

Ques : Which option you will choose to show or hide light glyphs?
Ans  : Click Tools menu > Palettes > Dashboard

Ques : The Drawing Recovery Manager displays a list of which drawing file types after a program or system failure?
Ans  : All of the above

Ques : You can not create Standards Checking for which of the given named objects?
Ans  : None of the above

Ques :  Which of the following geometric objects can not be broken?
Ans  : All of the above

Ques : Which method will you choose to create 3D solids and surfaces from existing objects?
Ans  :  All of the above

Ques : Which keyboard shortcut will you select to cycle through the three isometric planes?
Ans  : F5

Ques : Which option is disabled when a nested reference is selected as shown in the given picture?
Ans  : D

Ques : Which of the given 3D viewing commands cannot be used, while working in paper space?
Ans  : All of the above

Ques : Which of the given changes cannot be undone by Layer Previous?
Ans  : All of the above

Ques : Which of the following properties is not included within the Reference Manager?
Ans  : Host version

Ques : Which keyboard shortcut will you select to toggle polar tracking?
Ans  : F10

Ques : Which among the following system variables controls the user defined area on the status line?
Ans  : MODEMACRO

Ques : In which conditions, can you make a layer, the current layer?
Ans  : When it is the default layer

Ques : State True or False.

Mesh components are comprised of vertices, faces, polygons, and edges.
Ans  : True

Ques : State whether True or False.

You cannot use CONVTOSOLID with polylines that contain vertices with 0 width.
Ans  : False

Ques : State True or False.

All settings for the sun except geographic location are saved per drawing, not per viewport.
Ans  : True

Ques : Which type of light emits uniform parallel light rays in one direction only in AutoCAD2007?
Ans  : Distant Lights

Ques : State whether True or False.

Dimensional input is available for ARC, CIRCLE, ELLIPSE, LINE, and PLINE.
Ans  : True

Ques : Which method of Handshaking uses additional wires in the cable between the plotter and computer?
Ans  : Hardware handshaking

Ques :    Which AutoSnap tool is not turned on by default?
Ans  : Aperture box

Ques : Which of the following plot style table files have an .stb extensions?
Ans  : Both a and b

Ques : Which of the following types of files can be used as maps?
Ans  : PNG

Ques : Which type of section object grip does option A display, as shown in the picture?
Ans  :  Base grip

Ques : State True or False.

DWF passwords are not case sensitive but DWG passwords are.
Ans  :  False

Ques :  Which of the following key is not used by Digital IDs?
Ans  : Public key

Ques : Which option will you select to attach drawing references (Xrefs)?
Ans  :  All of the above

Ques : Which referencing method uses the customization group and element ID?
Ans  : Both a and b

Ques :  Which of the given options displays the layer properties manager in the given picture?
Ans  : None of the above

Ques : Which type of material is/are available for realistic and realistic metal templates?
Ans  : All of the above

Ques :  Which among the following objects can not be used as the cutting plane for slicing a solid?
Ans  : None of the above

Ques : Which field displays pound signs as shown in the given picture?
Ans  : None of the above

Ques : Which among the following is not a state of section objects?
Ans  :  Section Size

Ques : Which option is not available in AutoCAD2007 to repair a damaged drawing file?
Ans  : None of the above

Ques : Autocad does not provide Plotter drivers to which type of files?
Ans  : None of the above

Ques :State whether True or False.

Profiles do not store template file locations settings.
Ans  : True

Ques : Which option displays my workspace as shown in the given picture?
Ans  : C

Ques : Which option displays the major axis in the given picture?
Ans  : D

Ques :  Which of the following is not a type of dimensioning?
Ans  : Rotational

Ques : Which switch suppresses the display of the Sheet Set Manager window on startup?
Ans  :  /set

Ques : Which option means that the sheet is in a special state as shown in the given picture?
Ans  :  All of the above

Ques : Which type of action can you use in a Dynamic block?
Ans  : All of the above

Ques : Which keyboard shortcut you will select to toggle the command window?
Ans  : CTRL+9

Ques : You can attach a digital signature to which of the following file types?
Ans  :  All of the above

Ques : Which of the given editing commands are not available for OLE objects?
Ans  : All of the above

Ques : Which option you will choose to create solid filled areas?
Ans  : Hatches with a solid hatch pattern

Ques : State whether True or False.

The path has to be a line, arc, elliptical arc, circle, polyline, 3D polyline, or spline, to be linked to a target or a camera.
Ans  : True

Ques : State whether True or False.

Break, chamfer, fillet, lengthen and offset editing commands can be used on Multilines.
Ans  : True

Ques : State whether True or False.

The attribute extraction wizard creates a file with a.blk file extension.
Ans  : True

Ques : Which of the following layer properties is not checked by the layer plug-in?
Ans  : Freeze/Thaw

Ques : When you use grips to edit an object, what type of information does the dimensional input tooltip display?
Ans  : All of the above

Ques : Which of the following Online content types include blocks for architectural, mechanical and GIS applications in the DesignCenter online folders?
Ans  : All of the above

Ques : Which of the following default filters in the Layer Properties Manager displays all the layers on which objects in the current drawing are drawn?
Ans  : Xref

Ques : Which part of a dimension displays extension lines as shown in the given picture?
Ans  : D

Ques : Which among the following hyperlinks stores the full path to a file location in your drawings?
Ans  :  Absolute hyperlinks

Ques :  Which diesel error message means syntax error as shown in the given picture?
Ans  : A

Ques : State whether True or False.

Layer 0 can be deleted or renamed.
Ans  : False

Ques : When does a temporary history entry state occur?
Ans  : Both a and b

Ques : What can you do with the DesignCenter?
Ans  : All of the above

Ques : Which among the following types of coordinates displays update as you move the cursor?
Ans  : All of the above

Ques :  Menu swapping is not supported for which of the following interface elements?
Ans  :  None of the above

Ques : Which of the following elements in the Block editor can not be deleted, added, and modified?
Ans  : None of the above

Ques : Which keyboard shortcut you will use to display the Visual Basic Editor?
Ans  :  ALT+F11

Ques : Which keyboard shortcut you will use to display the macros dialog box?
Ans  :    ALT+F8

Ques :  Which option will you choose to open the Autodesk plotter manager?
Ans  : All of the above

Ques :In what type of text can fields not be inserted?
Ans  : Tolerances

Ques : Which option will you select to remove unused block definitions and decrease the drawing size?
Ans  : Purge

Ques : Which type of  radial dimension measures the radius of an arc or circle, and displays the dimension text with the letter R in front of it?
Ans  : Dimradius

Ques : Which of the following is not a type of mapping?
Ans  : Face Mapping

Ques :  Which dialog box is displayed when you set the STARTUP system variable to 1 (on)?
Ans  : Create New Drawing dialog box

Ques : State True or False.

As shown in the picture, the symbol for projected tolerance is preceded by a height value, which specifies the minimum projected tolerance zone.
Ans  : False

Thanks for watching this test Question & Answers. Please don't forget to leave a comment about this post. You can also find some more effective test question & answers, information, techniques, technology news, tutorials, online earning information, recent news, results, job news, job exam results, admission details & another related services on the following sites below. Happy Working!
News For Todays ARSBD oEtab ARSBD-JOBS DesignerTab

Share This:

oEtab

We're UpWok-Elance Test Answers Team. We provide latest online earning test question and answers. Here is also available top earning tips and tutorials. Always We're updating all latest question and answers. If you need any help please don't hesitate to contact us.

No Comment to " UpWork (oDesk) & Elance AutoCad 2007 Test Question & Answers "

We recommend you to subscribe us to get update from your email. If you want to ad a comment about our posts on this website just Sign Up here.

  • To add an Emoticons Show Icons
  • To add code Use [pre]code here[/pre]
  • To add an Image Use [img]IMAGE-URL-HERE[/img]
  • To add Youtube video just paste a video link like http://www.youtube.com/watch?v=0x_gnfpL3RM